Wheel drive
This small range covers from 800 Nm to 3.500 Nm maximum torque.
The models are suitable for track drives and for wheel drives applications because of the relatively high load supported by the bearings (8.000 kg in the EH models).
Several accessories are available (including static brake, disingagement system, control valves).
The models are suitable for track drives and for wheel drives applications because of the relatively high load supported by the bearings (8.000 kg in the EH models).
Several accessories are available (including static brake, disingagement system, control valves).
Slewing drive
This standard range covers from 3.000 Nm to 160.000 Nm nominal torque, however special solutions are available for torque values up to 2.000.000 Nm. The gearboxes have a compact design and a strong output support suitable for applications with high radial loads.
Each model can be supplied with pinion shaft or male shafts (splined or cylindrical).
Amongst the many accessories available static brakes can be fitted in a low opening pressure version (suitable for closed loop circuit) or in a dry version (suitable for high speed motor).
Some models have the ABS type approval for Azimuth Thruster applications however design approval is available on demand with all other major classification societies.
Each model can be supplied with pinion shaft or male shafts (splined or cylindrical).
Amongst the many accessories available static brakes can be fitted in a low opening pressure version (suitable for closed loop circuit) or in a dry version (suitable for high speed motor).
Some models have the ABS type approval for Azimuth Thruster applications however design approval is available on demand with all other major classification societies.
